Lonseal Epoxy Adhesive 650

Lonseal 650 Epoxy Adhesive is a wet set adhesive that is formulated for high performance installation of Lonseal flooring.

Features:

• Wet set adhesive
• CRI Green Label Plus Certified #GLP59909
• Applications:
  • Properly prepared, non-porous substrates and existing vinyl floors
  • Locations with temperature extremes, such as saunas, cold-storage, or walk-in freezers
  • Areas where flooding is possible, including around drains, shower areas, public bathrooms, pool/whirlpool aprons, or laundry rooms
  • Areas expecting heavy point loading or heavy/dynamic rolling loads, like hospital beds
  • Can be used on properly prepared, non-porous substrates and existing vinyl floors

Application Information:

• Adhesive must be applied by a trowel with 1/16" x 1/32" x 1/32" U-Notches (Model ZZ800 Trowel Sold Separately). These specs are specifically recommended by the adhesive MFG. If applied incorrectly the flooring will not lay properly.
• Approx. Spread rate: 170 - 225 sq. ft./gal. *
• Open time: Up to 15 minutes
• Working time: Up to 15 minutes

Notes: Trowel sizes listed are by width/depth/space. All information provided above will vary depending on the job site conditions, including temperature, humidity, substrate porosity, and applicator.

*Actual job site spread rate will vary depending on the substrate conditions.

OPEN TIME: Waiting time required before placing the flooring material into the adhesive.

WORKING TIME: Amount of time for the adhesive to accept the flooring material after being applied to the substrate.

Limitations: Protect from freezing. Use only when the substrate temperature is 65 °F – 85 °F (18.3 °C – 29.4 °C).

Physical Properties:

• Color: Beige
• Solids: 100%
• VOC: 10 g/L (mixture)
• Wt. /Gal.: 11.6 lbs./gal.
• Shelf Life: 1year, when stored unopened

Storage Conditions: 65 °F – 85 °F (18.3 °C – 29.4 °C); keep dry and out of direct sunlight in a well-ventilated area.

Application Conditions: 65 °F – 85 °F (18.3 °C – 29.4 °C)

Container Size: 1 gal.

Concrete Requirements: 5 lbs./1,000 ft2/24 h max. MVER; 75% max. RH; 9 pH max.

Approximate Spread Rate:

Note: Trowel size listed is by width/depth/space. All information provided in the adjacent table will vary depending on job site conditions, including temperature, humidity, and substrate conditions.

*APPROXIMATE SPREAD RATE: Actual job site spread rate will vary depending on the substrate conditions.

†OPEN TIME: Waiting time required before placing the flooring material into the adhesive.

‡WORKING TIME: Amount of time for the adhesive to accept the flooring material after being applied

• to the substrate.
• Up to 15 minutes†
• Up to 15 minutes‡

U-notch Trowel:

• 1/16″ x 1/32″ x 1/32″
• 170 – 225 sq. ft./gal.*

Specifications:

• Color: Beige
• Solids: 100%
• VOC: 10 g/L (mixture)
• Part A: 916 U.S. gal.
• Part B: .083 U.S. gal.
  • Part A bucket size is approximately 1.5 U.S. gallons
  • When Part A and B are combined the bucket will appear to be approximately 2/3 full
• Wt. /Gal.: 11.6 lbs./gal.
• Shelf Life: 1 Year, When stored unopened
• Storage Conditions: 70 ° F 85 & (21.1 ° C 29.4 &)
  • Keep dry and out of direct sunlight in a well-ventilated area.
• Application Conditions: 70 & 85 & (21.1 & 29.4 &)
• Container Size: 1 gal.
• Approx. Coverage Area: 170-225 Square Feet
• Concrete Requirements: 5 lbs./1,000 ft2/24 h max. MVER; 75% max. RH; 9 pH max.